【EU Stock&Free VAT】DIY CNC 1610 Pro GRBL Controller Laser Engraving Machine Router Kit Milling Pvc Pcb Wood


【EU Stock&Free VAT】DIY CNC 1610 Pro GRBL Controller Laser Engraving Machine Router Kit Milling Pvc Pcb Wood


Category: Vendor: LCNWood Channa

Price: 150.50

Good News: We have warehouse in some countries, check as below

Package include:

1 set 1610 Pro Engraver Laser CNC Router with ER11 collet (not include laser head)

1x GRBL 1.1 Control Board

1x Power Supply

10 x 20°0.1mm Drill Bits

1Set Allen Wrench

1x 4G USB flash drive include english user manual & GRBL software

The machine for a full set of spare parts, shall be installed by the
buyers, the package include the U Disk , with detailed user manual and
free software,buyers don’t need to worry about machine assembly.
We suggest CNC-based buyers to buy, this machine is not industrial grade level.



Max working area: 18*10*4.5cm

Frame size: 30*26*25cm

Table size: 18*10cm

Material: Aluminum Alloy

Control software: Grbl Controller (Candle)

Screw: 10mm in diameter

Interface: USB

Stepper motor: 42 stepper motor 1.3A/0.3Nm

Spindle: 775 spindle, Diameter 45mm 10000rpm maximum power 120W

Power: 24V 5.6A power adapter (input voltage 110-240V)

System requirements: windows XP, win7, win8, win10 (32/64 can be)

Design software: All CAM (computer aided manufacturing) software can be

Main application: can be engraved plastic, wood, acrylic, pvc, pcb, carbon fiber, wood, density board and the like material.

Body used profiles and plastic, small size, light weight, USB interface, GRBL control system, learning, entry preferred. Can use carving knife, but also can use laser engraving. Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.

2. GRBL 1.1F USB port cnc engraving machine control board, 3 axis control


Connection: USB (USB-CH340)

Software: GRBL controller, UniversalGcodeSender

Input voltage: 24VDC (12-24VDC)

Stepper motor: support 24V 2A

Spindle motor: support 24V 10A (supports PWM0%-100%)

Master chip: atmel 328P (arduino nano)

Spindle drive chip: MOSFET (recommendation 12~36V, current: within 10A)

Spindle PWM speed: Support

Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)

Laser engraving: Support

Power Interface: 5.5-2.5mm DC interface

Support system: win-xp, win7, win8, win10


add the outer casing: mainly for the bare board of the control board, short circuit problem during use
add the power button switch (this switch is the power supply control signal, there is no large current passing through the switch, do not worry about the switch size)
Cancel the drive module, integrated imported stepper motor drive, with short circuit protection, no need to worry about module damage. And integrated heat dissipation aluminum alloy
add the fan to force heat dissipation.
add offline recognition to insert offline modules and computers at the same time. Offlinewill automatically identify if there is computer control.
Enhanced spindle drive. Can support 20,000 rpm spindle. Support for larger power spindles

Small and practical, no problem for using on your desk.
The control system is open source (technology that controls system is provided) for some players who like DIY.
Desktop DIY mini CNC engraving machine for carving and more cost-effective than normal engraving machine.
Support our professional English design software for Win 7, XP, Win 8, Win 10.
500mw / 2500mw / 5500mw optional laser module with heatsink, high laser engraving power and long working time.
180*100*45mm working area, Control Software: GRBL (include ER11 chuck).
Aluminum alloy and nylon material with fine workmanship show excellence in quality.
Very interesting to install and use, perfect gift for engraving DIY enthusiasts.
Wide application: it can be used for printing, hand tools and industrial processing.

Can use Laser (2-axis plane carving):
Laser interface: 12V, support PWN
Laser Power: 500mw/2500mw/5500mw
Control Software: laser GRBL
Support File: G-code/picture
Working Accuracy: 0.1mm
Machinable Material: Wood, plastic, leather, paper, etc


1 Q: Does this machine need to be assembled when I received it?

A: This machine comes as a kit. You need to assemble it yourself. All tools and parts are included

in the kit.

2 Q: How to assemble the kit?

A: We’ll provide whole assemble and operating manual, please share your email address, then we’ll send to you.

3 Q: Are there software and instructions can I get it?

A: You can get the software in a USB disk with machine.

4 Q: And what image format the software supports? Engraving mode?

A: Supported Image Format: jpg, bmp, svg, G-code

Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving

5 Q: What type of computer system can run its software?

A: The software only support the Windows XP/7/8/10.

6 Q: What’s the laser’s lifetime?

A: The laser module has over 6,000 hours lifetime.

7 Q: What material can it engrave?

A: Wood, bamboo, plastic, paper, leather, rubber, MDF.

8 Q: What material can it cut?

A: wood, paper, thin leather.

9 Q:Can I use it to cut or engrave on metal?

A: It can not engrave or cut on any metal.

10 Q: Can I regulate the laser power or is the laser power adjustable?

A: Sorry that the fixed laser power is not adjustable, but the engraving speed is adjustable.

11 Q: How long can the machine work continuously?

A: It can work continuously about 45 minutes, after the laser mold cools
down (about half an hour), then start working again. Long time work
continuously with shorten the laser module lifetime

12 Q: My laser doesn’t work, what should I do?

If the machine does not work, it might because:

A The wire connection is wrong. Please check the connection like the picture shown.

B Your computer could not support the software. Please use Win XP 7/8/10 to check it.

C Software problem.Please check whether wires are inserted right. And then check your data setting.

D The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email.

E Laser module/ driver board/ power supply is broken.

Please check which part is the main problem, and then send us a video to prove it.

Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution.

Friendly Note:

Due to the different wattage of the laser head, the engraving material
range, engraving speed, depth, etc. are different. The greater the
power, the faster the speed

3W-5.5W laser:

1. Can carve wood, paper, plastic, leather, bamboo, bones, teeth, etc.

2. Can’t carve metal

7W-10W laser:

1.Can carve Wood, paper, plastic, leather, bamboo, bones, teeth, acrylic and other materials that can be burned by fire.

2. Can carve 304 201 pure color stainless steel, painted metal (except
stainless steel, other pure metal with primary color smooth surface
cannot be carved)


There are no reviews yet.

Be the first to review “【EU Stock&Free VAT】DIY CNC 1610 Pro GRBL Controller Laser Engraving Machine Router Kit Milling Pvc Pcb Wood”

Your email address will not be published. Required fields are marked *

Vendor Information

Vendor: LCNWood Channa

Your name: Your email address: Your message: