Description
Price: 161.54 - 143.77
Good News: We have warehouse in some countries, check as below
Package include:
1 x 775 Spindle Motor with ER11 Collet
1 x GRBL control board
10 x 20° 0.1mm drill bits
1 set of allen wrench
1 x Power Supply
1 x U disk
English manual link will be sent to your email.
Introduction:
Body used profiles and plastic, small size, light weight, USB interface, GRBL control system, learning, entry preferred. Can use carving knife, but also can use laser engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Introduction:
Body used profiles and plastic, small size, light weight, USB interface, GRBL control system, learning, entry preferred. Can use carving knife, but also can use laser engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area: 30 x 18 x 4.5 cm
Frame size: 42 x 25 x 27 cm
Spindle: 775 spindle motor (12-36V) 24V: 10000r/min
Spindle Collet: ER11-3.175mm, Support 0-7mm
Step motor: Nema17 Stepper, Torque 0.3N/M, 1.3A
Power supply: AC110-240V
Software: GRBL controller
Support System: Windows XP / Win 7 / Win 8 /
Drill bits: tip 0.1 mm ,20 degree , diameter 3.175 mm.
Laser: 500mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
-
GRBL 1.1F, USB port cnc engraving machine control board, 3 axis control
Specification:
Connection: USB (USB-CH340)
Software: GRBL controller, UniversalGcodeSender
Input voltage: 12-36V
Master chip: atmel 328P (arduino nano)
Stepper motor driver: A4988
Spindle drive chip: MOSFET (recommendation 12~36V, current: within 10A)
Spindle PWM speed: Support
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)
Laser engraving: Support
Power Interface: 5.5-2.5mm DC interface
-
GRBL 1.1F, USB port cnc engraving machine control board, 3 axis control
Specification:
Connection: USB (USB-CH340)
Software: GRBL controller, UniversalGcodeSender
Input voltage: 12-36V
Master chip: atmel 328P (arduino nano)
Stepper motor driver: A4988
Spindle drive chip: MOSFET (recommendation 12~36V, current: within 10A)
Spindle PWM speed: Support
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)
Laser engraving: Support
Power Interface: 5.5-2.5mm DC interface
Can be used for carving, cutting. Can cut wood
Transparent and white material can not be cut.
Laser focus adjustable
Reviews
There are no reviews yet.